How to repair corrupted memory card or pen drive with computer command prompt



 
Here's the missing memory card, pen drive means that the memory card that shows on the computer but does not format. Or it`s shows write protected. Or the ability to hold the memory shows that it does not have any holding power wrong.

You can easily format these memory cards or pen drives if you want.

To do this, first you need to plug in your corrupted memory card into your computer. Then go to My Computer and see what is the drive letter of your memory or pen drive?

Then you have to open cmd command on your computer. To open the cmd command easily, you must first launch the windows button + R = run command. Then you have to write cmd here and then click on OK to launch the command prompt.

So first you have to write:

Ø Diskpart

No space here. Then press enter. Then you will write:

Ø List disk

Just write this way and press enter. Then your computer will show the number of the removal disk, including the hard disk. Then type:

Ø Select disk (your disk number)
Ø Example: select disk 2

Then press the Enter key then your disk will be selected. Then you need to type:

Ø     Clean

This will clear your select disk. Before selecting the so-called disk, you must select it.

To type this now:

Ø Create partition primary

Press enter. Then you have to type it again

Ø  Active

Then press Enter, then your memory will be activated as a primary partition. Then write it

Ø List volume

Press enter. So to show the volume / disk of your computer, the number of disc on your computer.
You need to select the volume of your memory or pen drive from there. Before you choose, take a good look.
Then write it

Ø Select volume (your volume number)
Ø Example: select volume 7

If you have to enter it then your volume will be selected. And write at the end

Ø Format fs fat32

As soon as you press Enter, your corrupted memory card / pendrive formatting will start.
Take some time from the format. If you're completely formatted

100 percent complete After some time the wait will show that successful disk formatted.

You can then turn off cmd command.
For this you press exit and press enter. The cmd command prompt will stop immediately. This time you can check out your my computer.





Share this

Related Posts

Previous
Next Post »